Bass Pro Shops® Bobber Stops
Pre-tied and ready to use. Made with assorted hi-viz pink and yellow braided line; includes spacer beads.
Rated 4.3 out of 5 by 32 reviewers.
Rated 5 out of 5 by crappieman82 Excellent For Ice Fishing- Worth the Money I have used these bobber stops many times when ice fishing and would recommend them to anyone who will be changing depths frequently when ice fishing. I have never had a problem with the bobber stop slipping and as a added bonus, they dont kink up the line like conventional bobbers do. This is a wonderful product and well worth the money December 28, 2006
Rated 5 out of 5 by kiaking1 bobber stopper I have used these bobber stopper's for many years.and one good secret to due is.when you put it on your line,wet the knot with water,pull tight with pliers,than with all the string left over,put some super glue on the left over string,than cut off,and leave about a 1.8 inch string left,to later tighten up if need be,and the string will not break or fray..and once you do that,the bobber stopper will not fray,or come loose.just make shore you dont glue it to the line.than after that is done,adjust the depth you want,and start fishing.it works every time and last for a long time that way. now than i put a beed on line,put slip float on,than 2 other beeds,and than a small bullet weight,and than tie the leader on line.works great,catches fish works great. April 18, 2013
Rated 5 out of 5 by free2fish easy to use/good quality Easy to use, good quality and the high vis colors really help. April 8, 2013
Rated 5 out of 5 by WyomingPerchMan Price is right... Work great and is easy to use.. these stops I have use on some of my poles for over 12 years and they are still one with the original stop... and line... Great... January 28, 2013
5 Questions | 19 Answers
Get help about this item from fellow customers.
Ask your questions. Share your answers.
A:PULL LINE THROUGH PLASTIC TUBE. THEN PULL OUT TUBE AND PULL LINE TIGHT. CUT OFF ENDS. THEN YOU CAN ADJUST UP AND DOWN LINE TO SET DEPTH.
A:They come with directions. Theuy are very easy to use.
A:you slide the stopper off the post on to your line.. the post holding this type is not slotted so you must be sure to slide it off the post towards the rod tip or the post will be part of your rig.. not good
A:Slide the plastic tube with stop on the line, slide the stop off of the plastic tube, remove the tube, pull tight the tag ends and trim off excess. Thread on the bead (optional, they work fine with out the bead), then put on slip bobber add weight and hook. Ready to fish. Just slide the stop up and down the line to set depth. A little moister is recommended before you slide the stop up and down the line.
A:to hook them up thread your line through the plastic i like to wet the thread with saliva or water slide the material towards the top of the plastic and off pull the tag end of the line tight and clip them as close as possible this product is great for avi crappie fisherman who need to adjust there depth alot just slide the knot up or down the line
A:No problem, even with ultralight spinning gear.
A:They work great if you trim the ends of the thread as the directions note. I've never had any trouble with them going through eyes or the reel.
A:no the ones i purchased not only hung on the spool but they also dont cast well because of the rod eyes.. hangs often
A:Yes they do. If you hook it up right. You'll have no problem. It works better then those snap on plastic ones they sell at the fishing show/sportsmen show! Fish away my friend!
A:They do reel through the eyes okay. I have encountered some issues when using mico-light tackle, but nothing real bad.
A:the bobberstops will not effect your realing through the eyes or real ive been fishing with them for 10 plus years and have never had a problem.although if you are using a rod with real small guides it could effect your casting
A:I wouldn't make any sense to use it for a 10lb. line +(plus) for a bobber stopper. You only use bobber stopper's on small fish, like sunfish and crappies. You only need a 4-6lb line. Mono or flo-carbon to fish for those fishes. So it's a yes if you use it for those line sizes and fishes!
A:These types of stop work on a little as 2 lbs test line and I have used them on up to 30 lbs test line. I do not think they come in any other sizes.
A:all the bobber stops will fit any size line however there are different diameter threads the only difference is the thicker ones are used for slip floats with slightly larger holes in them
1 of 1
1 of 1