Attwood® Bimini Top Storage Boots
Sale price:
Clearance price:
Starting at:
Sale starting at:
Clearance starting at:
Reg. price:
Protect your Bimini Top during storage with a matching Bimini Top Storage Boot from Attwood. Attwood Bimini Storage Boots feature quality needlework and are sewn 4-ply for extra strength with no exposed raw edge for durability and to resist leakage. Made in USA.
The Attwood Bimini Boots made from premium Sunbrella® brand acrylic fabric which won’t fade, harden, crack, peel, trap heat or moisture or be affected by the elements. Acrylic Bimini Boots are easy to clean and are available in a wide variety of colors.
The Attwood Bimini Boots made from denim-backed vinyl making them completely waterproof and easy to clean.
Rated 4.4 out of 5Â by 7
reviewers.
Rated 5 out of 5Â by rdritretiredfisher works great
Easy to store the top in. Bought it with my Bimjni top.
May 24, 2010
Rated 5 out of 5Â by rajinjay Great purchase
Item was exactly as described and fit very well. I would recommend this cover to anyone.
May 10, 2010
Rated 4 out of 5Â by RMoffett Quality seems good
I put the cover on my bimini and the quality seems very good, but I have not had it in trailering or water conditions yet so will have to wait on that before final verdict.
May 3, 2010
Rated 5 out of 5Â by flounderhunter Pleasantly surprised
It is great quality and fit perfectly. Couldn't be happier. Would definitely buy another if needed.
April 14, 2010
14 Questions | 14 Answers
Outdoor Answers
Get help about this item from fellow customers.
Ask your questions. Share your answers.
 Expand All
 Collapse All
(read all my Q&A)
Answers
A:Â
If your beam for your 2007 Bayliner is 83-inches then try the 75-81 or 82-88 inches. For the Bimini Top Storage Cover you will need to find the proper fit for your boat. You will need to measure your mounting locations, see below.Width - Find the pivot where the bimini frame mounting hardware will be mounted on the sides of the boat. This will be the center of the bimini length. Determine top width by measuring the distance between the mounting points on one side of the boat to the same location on the opposite side of the boat. This measurement is not the same as the actual beam of the boat. The frame can be mounted to a flat horizontal surface, or a rail. Tops include horizontal mounting hardware.
Thanks
Answers
A:Â
To find the proper fit you will need to measure your mounting locations, see below.Width - Find the pivot where the bimini frame mounting hardware will be mounted on the sides of the boat. This will be the center of the bimini length. Determine top width by measuring the distance between the mounting points on one side of the boat to the same location on the opposite side of the boat. This measurement is not the same as the actual beam of the boat. The frame can be mounted to a flat horizontal surface, or a rail. Tops include horizontal mounting hardware.
Answers
A:Â
You will order by the width, which is the same way you order the top/frame.Width - Find the pivot where the bimini frame mounting hardware will be mounted on the sides of the boat. This will be the center of the bimini length. Determine top width by measuring the distance between the mounting point on one side of the boat to the same location on the opposite side of the boat. This measurement is not the same as the actual beam of the boat. The frame can be mounted to a flat horizontal surface, or a rail.
Details:Â
I have the 3 bow top so do I have to dismantle any of the bows or just fold top over them and let it rest on rear of the boat. Just doesn't look like it will fold over correctly.Answers
A:Â
Yes, we just ordered a boot for our Attwood 3-Bow Bimini and the boot fits perfect after wrapping excess cover around the frame.The boots are like a sleeping bag with both ends open. You just simply unzip the boot and lay the folded top on top and tuck any excess cover and straps, then zip up.
Attwood makes their boots to fit their bimini as long as you order the same length range your frame is.
Details:Â
My pontoon has an oversized bimini top (11'6"). It looks to be a 4 bow and bimini support poles are 1' 1/4" thick. it also has a light that is attached to the rear bow. Does this boot have an opening for the light?Thanks,
Answers
A:Â
According to the manufacturer, No, it is made for 1" frames only and would not fit a frame up to 11'. No, this does not have a light cut out. ThanksDetails:Â
I need new boots for my 2002 25' Party Barge. Which Attwood boots are the right size?Answers
A:Â
You will need to measure the width.Width - by measuring the distance between the mounting point on one side of the boat to the same location on the opposite side of the boat. This measurement is not the same as the actual beam of the boat.
Answers
A:Â
same as when ordering the topWidth - Find the pivot where the bimini frame mounting hardware will be mounted on the sides of the boat. This will be the center of the bimini length. Determine top width by measuring the distance between the mounting point on one side of the boat to the same location on the opposite side of the boat. This measurement is not the same as the actual beam of the boat. The frame can be mounted to a flat horizontal surface, or a rail. Tops include horizontal mounting hardware.
Get help about this item from fellow customers.
Ask your questions. Share your answers.
14 Questions | 14 Answers
