Free Shipping on orders $50+ No code needed.

Select the "Economy Shipping" option at checkout.

Free Shipping on orders of $50 or more applies to economy shipping only to US and Canadian addresses on all internet or phone merchandise orders. (Canadian orders will be charged a $3.50 brokerage fee, duty and tax.) Excludes gift cards, orders shipped outside of the US and Canada, expedited or additional shipping and hazardous, special fees. Shipping charges on previous orders will not be reimbursed.

You may also order by calling 1-800-BASS-PRO (1-800-227-7776). Give the phone representative key code L4BD.

Arizona Carbon E-Z Fletch

   

Sale price: Clearance price: Starting at: Sale starting at: Clearance starting at: Reg. price:

Size
Description
Other specs Quantity Price & availability

5"

Right Helical

Product Color:
Blue
  • $49.99

  • SKU: 536782

  • In Stock
  • Add to Cart

    Add to Wish List

5"

Straight

Product Color:
Blue
  • $49.99

  • SKU: 598863

  • In Stock
  • Add to Cart

    Add to Wish List

Version of the Arizona E-Z Fletch tool specially designed to fletch carbon arrows. Fits all shafts from the smallest carbon up to aluminum shaft size 2018. Precisely applies three feathers or vanes at the same time. Rotating nock receiver lets you preset nock position. Compact, lightweight, and portable.

  • Applies three vanes at once
  • Fits all shafts from the smallest carbon to size 2018 aluminum shafts
  • Rotating nock receiver allows you to preset nock position  
Arizona Carbon E-Z Fletch 4.6 5 27 27
E-z Fletch A total waste of money . Got a Jo Jan love it and can fletch 6 arrows at a time any way I wish too . October 25, 2014
ez fletch pro i bought this fletcher, because i can't fin my jojan clamps.it came in by mail i opened the box and read the direction, went to the garage and opened a can of acetone found a clean rag, found my norway industries fusion 3.0and 2.1 vanes got my fletch tite glue ready and started putting vanes on, for this stoke patient it was easy enough to do, the mandrel pinched my left hand,more than once, which was my faul, i found i can push the dring with my not as paralyzed left hand holding the mandrel with my righ i was able to refletch an arrow in no time, now i need to give the fletchtite glue more tim e to setup.. my impatient cause me to have to redo a vane.overall i like this fletcher ,yes it is made of plastic , butworks good i might say great once i get my routine down, being new to this jig, i am more comfortable with my jojan fletcher, this one i can take it with me, the jo jan is attached to my bench, so not portable. May 16, 2014
rookie fletching I borrowed one of these from a friend. It was amazingly easy and it saved me money. After using his it was a must have for myself. Anyone can fletch arrows like a pro with the Arizona EZ fletch! March 26, 2013
Nothing else comes close! I use the right helix and also go an extra set of arms in case glue buildup got to bad. Have fletched almost every size vane from fusion 1.5"-3", blazers, NAP twister vanes, dura vanes, and feathers. This is my 4 th jig and by far the quickest and most consistent of all the others I have used. Can easily fletch a dozen arrows in 15 minutes with ease. The arms clean easy and no adjustments are required to fletch diff size arrows or vanes. I even fletched my kids small aluminum & fiberglass arrows with no problems. December 19, 2012
2 3 4 5 ... 7 next>>
6 Questions | 24 Answers

Outdoor Answers

Get help about this item from fellow customers.

Ask your questions. Share your answers.

 
 
Browse Q&A
 
 
Sort by
 
Q: 
2 answers

Offset angle

Details: 
What is the angle that this tool offsets the vanes? I know they they offer several models that can set the vanes at different angles.
1 year, 3 months ago
Answer this Question
0
0

Answers

A: 
3degrees

Staff Answer
A: 
Hi, the Right Helical (SKU 536782) will put a helical on the vane or feather. It will accommodate any arrow 5/16” (.3125) diameter or smaller and handle any right wing feather or vane up to 5” in length. This is our most popular tool and works extremely well with the new 2” vanes that are out now. The Straight (SKU 598863) tool is perfect for arrows 5/16” (.3125) diameter or smaller with a very slight offset. 4 Fletch Instructions: http://ezfletch.com/pages.php?pageid=9#Fletching_With_Feathers

Thanks
7 months ago
by
 - Springfield, MO
Read all my Q&A (read all my Q&A)
0
0
Vote as Best Answer
Thanks for Voting
Details: 
I am looking to put Easton BTV's on factory firebolts
2 years, 8 months ago
Answer this Question
0
0

Answers

A: 
yes but you have to use the one for carbon arrows.
1 year, 7 months ago
0
0
Vote as Best Answer
Thanks for Voting

A: 
It says it works on everything from small diameter carbon to 2018 aluminum. Your bolts would be smaller than the aluminum arrows.
2 years ago
0
0
Vote as Best Answer
Thanks for Voting
Details: 
I have a right helical model for aluminum shafts and have been using it on both carbon and wooden arrow. I'm not sure why there is or what the diffrences might be.
2 years, 10 months ago
by
Anonymous
 - Tampa FL
Answer this Question
0
0

Answers

A: 
no difference, it will work with alumium carbon/wood shafts, of the correct size.

A: 
The difference is the size of the fletcher. An Arizona E-Z Fletch tool for aluminum arrows has a larger diameter hole at the top, and puts less pressure on the vanes for carbon arrows with a small diameter.
2 years ago
0
0
Vote as Best Answer
Thanks for Voting
3 years, 9 months ago
by
 - SouthWest OK
Read all my Q&A (read all my Q&A)
Answer this Question
0
0

Answers

A: 
works great with the smaller vanes
1 year, 7 months ago
0
0
Vote as Best Answer
Thanks for Voting

A: 
Yes Sir. Small vanes are all I've repaired so far, no problems.
1 year, 11 months ago
by
 - Dallas, Tx
Read all my Q&A (read all my Q&A)
0
0
Vote as Best Answer
Thanks for Voting

A: 
It looks like it will. I bought the mini because I use 2" blazer vanes on all my arrows. But the standard E-Z Fketch looks like it will work too.
2 years ago
0
0
Vote as Best Answer
Thanks for Voting

Top 500 Contributor
Top 500 Contributor
A: 
yes you can use small vanes with this. I have one myself and i use blazer vanes and fusion vanes. it works great.
3 years, 8 months ago
by
 - Morehead, KY
Read all my Q&A (read all my Q&A)
0
0
Vote as Best Answer
Thanks for Voting

A: 
Yes but they do not get as much of twist as using the smaller unit
3 years, 8 months ago
by
 - Queanbeyan NSW Australia
Read all my Q&A (read all my Q&A)
0
0
Vote as Best Answer
Thanks for Voting
 
Q: 
6 answers

Which model? Right?

Details: 
What's the difference between the right model and the other?
5 years, 7 months ago
Answer this Question
0
0

Answers

A: 
The right hand model puts the vanes on the shaft at an angle. It makes the arrow spin faster, giving it more stability in flight, resulting in more consistant shots. The other model puts the vanes on the shaft in a straight line from nock to point.
2 years ago
0
0
Vote as Best Answer
Thanks for Voting

A: 
Depending on what type of fletches you want, or use. The right one is for a rihgt helicle. If you want a slight rihgt twist on your vanes. The same goes for the left one. If you just want straight vanes, there is an Arizona E-Z fletch straight model on their website.
3 years, 8 months ago
by
 - Cranbrook British Columbia
Read all my Q&A (read all my Q&A)
0
0
Vote as Best Answer
Thanks for Voting

A: 
Direction of the vane and thus rotation of the arrow.
3 years, 8 months ago
by
 - Queanbeyan NSW Australia
Read all my Q&A (read all my Q&A)
0
0
Vote as Best Answer
Thanks for Voting

A: 
The difference between right and left model would refer to the offset of the vane placement on the arrow. Straight is, obviously straight, but right or left angles the vane thus creating some rotation for stability but loses a slight amount of speed. Also if you shoot a whisker biscuit right or left models can somewhat reduce vane life, but is minimal
3 years, 10 months ago
by
 - Cullman, Al
Read all my Q&A (read all my Q&A)
0
0
Vote as Best Answer
Thanks for Voting

Best Answer
A: 
The carbon right helical model attatches vanes with a 6 degree offset to spin the arrow for stabilization and is the model reccomended for right handed shooters using a fall-away or drop away rest. The carbon straight model has 1 degree of offset and is reccomended for shooters whe use captured or pass-through rests such as a whisker biscuit or octane hostage rests.
4 years, 7 months ago
0
0
Vote as Best Answer
Thanks for Voting

A: 
Tthe difference in the right or straight is the right puts a helical (puts the vane or feather on at a offset to the right )on the shaft this makes the arrow spin faster usually used for recurve or low poundage bows The straight sets the vane well ,straight on the shaft the most popular with todays bows
5 years, 3 months ago
0
0
Vote as Best Answer
Thanks for Voting
 
Q: 
7 answers

one vane???

Details: 
will this product allow you to fletch just one vane or do you have to remove all of the vanes and replace all of them ???
6 years, 3 months ago
Answer this Question
0
0

Answers

A: 
you can easily fletch just one vane with these
1 year, 7 months ago
0
0
Vote as Best Answer
Thanks for Voting

A: 
It repairs one, two, or all. Just put the remaining vanes in the arms and the one you are replacing is already in line to be inserted.
1 year, 11 months ago
by
 - Dallas, Tx
Read all my Q&A (read all my Q&A)
0
0
Vote as Best Answer
Thanks for Voting

A: 
Yes it does. It has one light blue arm, and two dark blue arms. You put your existing vanes in the two dark blue arms and your new vane in the light blue arm, apply glue, and close the arms. Simple.
2 years ago
0
0
Vote as Best Answer
Thanks for Voting

A: 
It will do one vane at a time. I just finished replacing one vane on two different arrows without a problem.
3 years, 8 months ago
by
 - Cranbrook British Columbia
Read all my Q&A (read all my Q&A)
0
0
Vote as Best Answer
Thanks for Voting

A: 
You can do one for a repair job. You just have to position the nock and fit the other vanes to their holder arms. Done it many times myself.
3 years, 8 months ago
by
 - Queanbeyan NSW Australia
Read all my Q&A (read all my Q&A)
0
0
Vote as Best Answer
Thanks for Voting

A: 
you can do one vane replacements. i do it all the time with my judo arrow. you do it the same as you would all three. it has a nock reciever that moves so your vanes will line up.
4 years, 7 months ago
by
 - coconino county
Read all my Q&A (read all my Q&A)
0
0
Vote as Best Answer
Thanks for Voting

A: 
You can do one at a time.
You will simply have to hold it in place by hand, and not using the spring loaded holder.
6 years, 2 months ago
0
0
Vote as Best Answer
Thanks for Voting
1 of 1
1 of 1

Need Help? 7 days a week: 7am to 10pm CT or call 1.800.227.7776 anytime