Loading...
Your Cart ()
Close Panel
ProMariner® Prosport Series On-Board Marine Battery Chargers
The next generation of on-board marine battery chargers is here! Three built-in performance charge profiles are digitally selected with color coded programming caps. Program and reprogram them in the event your batteries are changed to a different type. The ProSport series still features Distrubuted-On-Demand™ charging--so 100% of the output is always used, distributing total available charging amps to one bank or a combination of all banks as required. Fully automatic, multistage charging with a safe maintenance mode for long- or short-term storage. Features an extruded all-aluminum, amplifier-style housing
[Read More]
The next generation of on-board marine battery chargers is here! Three built-in performance charge profiles are digitally selected with color coded programming caps. Program and reprogram them in the event your batteries are changed to a different type. The ProSport series still features Distrubuted-On-Demand™ charging--so 100% of the output is always used, distributing total available charging amps to one bank or a combination of all banks as required. Fully automatic, multistage charging with a safe maintenance mode for long- or short-term storage. Features an extruded all-aluminum, amplifier-style housing that's 100% waterproof and shockproof and a lead acid/gel battery one-time selector for an optimum charge on either battery type. Dynamic thermal output control gives you the appropriate charging amps while maintaining the proper temperature. Built-in ignition, reverse polarity, overheat, and short-circuit protection. Fully prewired. Manufacturer's two-year warranty.
4 Questions | 5 Answers
Outdoor Answers
Get help about this item from fellow customers.
Ask your questions. Share your answers.
Expand All
Collapse AllDetails:
or should it only be mounted standing up, as in the picture? The instructions say to have the fins horizontal.The way I see it, if the unit is mounted to the deck, the fins are still horizontal. Am I correct in thinking this way?
(read all my Q&A)
Answers
A:
Yes, you can mount flat.Make sure you have adequate ventilation for cooling when charging. It can be mounted in any direction; it can even be mounted on the underside of a hatch, or any wall that you have enough room (as long as it is mounted as far as possible from the batteries or fuel tank). Don’t mount them on carpets---if you have no other location, mount it on either a board or with some kind of spacers to lift the charger off of the carpeted area. If the charger is mounted in an enclosed space it is best to open a hatch during the first stage of charging.
Answers
A:
CALL THE COMPANY. THEIR CUSTOMER SERVICE IS NEXT TO NONE. MINE WAS REPLACED, NO QUESTIONS ASKED. WHAT A COMPANY!Answers
A:
They claim it to be waterproof and saltwater tested
A:
Yes, this item has been tested for Saltwater use. Waterproof and Saltwater tested.Details:
I bought one of these chargers and when it came there were 2 little plug things in the instruction package. What are they and what are they used for.Answers
A:
They are programming caps. The charger comes set equipped to charge standard Flooded (lead acid)/AGM (Absorbed Glass mat) batteries. To set the charger for high performance AGM or GEL batteries, remove the black programming cap (near the electrical cord connection) and replace it with either the red AGM HP or gray GEL programming cap. Anytime you change caps, apply marine silicone to the threads of the cap being installed.1 of 1
Get help about this item from fellow customers.
Ask your questions. Share your answers.
4 Questions | 5 Answers
1 of 1
Articles & Information
Customer Service
Live Assistance:
Daily 7am-10pm Central Time
Daily 7am-10pm Central Time
- 1-800-227-7776
- Contact Us
- Reward Points
- Gift Cards
Prices shown are in U.S. funds
All pages © 2006 - 2012 BPS Direct, L.L.C. All rights reserved.