Loading...
Your Cart ()
Close Panel
Minn Kota® Edge Bow Mount Trolling Motors
- Tempered marine-grade aluminum extrusion construction
- Latch & Door with soft grip knob for easy motor removal
- Rock-solid stowing for rough water runs
- Pull grip stows on shaft yoke
- Extended motor rest for hassle-free stowing versatility at any depth adjustment
- No new mounting holes needed for replacement of old motor
- Manufacturer's 2-year warranty
Take it to the limit! Treacherous stump fields. Tangled weedbeds. Punishing wind and waves. Big fish pose big challenges. Minn Kota's Edge Bow Mount Trolling Motor delivers the unrelenting thrust [Read More]
- Tempered marine-grade aluminum extrusion construction
- Latch & Door with soft grip knob for easy motor removal
- Rock-solid stowing for rough water runs
- Pull grip stows on shaft yoke
- Extended motor rest for hassle-free stowing versatility at any depth adjustment
- No new mounting holes needed for replacement of old motor
- Manufacturer's 2-year warranty
Take it to the limit! Treacherous stump fields. Tangled weedbeds. Punishing wind and waves. Big fish pose big challenges. Minn Kota's Edge Bow Mount Trolling Motor delivers the unrelenting thrust and rugged, dependable construction that takes trolling motor performance to the edge—and keeps it there—until the livewell is full and the scales are in your favor!
Tilt Twist Tiller™
Puts natural outboard convenience in the palm of your hand. Quick access; multi-position handle.
29 Questions | 51 Answers
Outdoor Answers
Get help about this item from fellow customers.
Ask your questions. Share your answers.
Expand All
Collapse AllDetails:
I noticed the red/black wires have a smaller diamter connector then say the Endura does, how would I connect the Edge straight to a battery?
(read all my Q&A)
Answers
Top 250 Contributor
A:
go to an auto parts store and get a 60 amp fuse holder and a set of battery clamps.
A:
Should have the red and black wires or you can use the MKR-18 Trolling Motor Plug & Receptacle, purchased through Minn Kota.Images for this Answer
(click to see full-size image)
Details:
i have a 14 foot aluminium boat and i want 24 volt for a longer run time, is 70 lb thrust too much?Answers
A:
For a 14 foot boot Minimum Thrust would be 35 pounds but then you will need to know the boat weight, which a 70 pound thrust is good for 3500 lbs weight (boat, gear, people). Hope this helps. ThanksDetails:
Have a Bass tracker 17.5 1989 fishing boat. My orginal Minn Kota 565 gave up the ghost so I have to replace it. Want one that is easy to install and more worried about the electrical connections and not having to put new holes in the bow. Also sort ot would like more thrust as the original is only 28 lbs. Do not need all the bells and whistle just something to get around the lake. Thanks in advanceAnswers
Top 1000 Contributor
A:
Installation of the Edge Bow Mount Trolling Motor is easy. A 45 lbs thrust or a 55 will pull your boat with ease.A:
you cannot go wrong with this motor. Just purchased for a 16.5 fisher, loaded for bear and it performed flawlessly. See my reviewDetails:
also can you remove or install your motor from the lock and door while in the stowed position, i can not do either.Answers
Top 1000 Contributor
A:
I have used an Edge by Minn Kota for several years and yes the shaft looks slightly bowed when in the stowed position. Do not be alarmed this is what makes the shaft resistant to damage when it hits something. If it was made of material that was rigid it could possibly break. You should be able to remove or install the motor while in the stowed position but it would be easier to do it while the motor is in the operating position.Answers
A:
The MKP-32 Minn Kota® Weedless Wedge™ 2 Replacement Prop item number 38-523-768-00.Details:
I have a 22 ft Bennington Pontoon BoatWhat size Edge and what shaft length do you recommend. Also do you have the gel based batteries
Answers
A:
the longest size available would be better for a pontoon. you can always raise it to make it shorter but you can never make it longerQ:
3 answers
i have a bass tracker pro team 175 txw i want to put a minn kota edge on my boat what size do i need
Details:
my motorguide is a 46 lbs. it has a bent shaft and ive always had good luck with minn kota. how hard is it to convert to minn kota would the edge 45 with 36" shaft be a good fitAnswers
A:
i put the edge 70 lb thrust 24 volt on my 175 pro and it works great.
Top 500 Contributor
A:
I would measure the shaft on your Motorguide first. Then I would match the shaft length when purchasing a MinnKota, as long as you're satisfied with the battery life and power of your 46lb. thrust. If the price difference isn't much I would step up in power, b/c you can never have too much power in a trolling motor when you're on the lake during a windy day. It shouldn't be hard to convert to the MinnKota at all, other than having different mounting hardware. If MinnKota has different hole patterns on the mounting bracket then you may have to epoxy some holes and drill new ones. Another thing about MinnKota TM's is that they're wider than MotorGuide's. That was a problem with my Nitro. The MinnKota wouldn't fit in my recessed floor location, whereas my Motorguide fit perfect. If you don't have a recessed floor location for a TM then ignore everything I said! Hope this helps in some way.A:
I recently bought a Minn Kota for my boat, and i found when you measure the existing motor you should measure all the way to the top of the head and buy that replacement length. Mine turned out to be a little short because I didnt know that. but it still works ok.Details:
i have a closed bow fiberglass boat from the 60's and need to know if the cable will reachAnswers
A:
The cable should still be long enough even for closed bow boats.Details:
Is there there guide lines to go by ?Answers
A:
Iuse to have a older boat and it was kind of heavy. It had a 45 lb. thrust on it and I was never really satisfied with it. i have a newer boat and it is lighter and the 46 lb thrust works well on it.
Top 250 Contributor
A:
id say about 55 if your in mostly calm waterDetails:
I have an Alweld 15' with 44" bottom. I have a mounting place for it on the bow but I also have lights extended on my side bumpers on the trailer. I can not have it over the side, it will catch the lights.Images for this Question
(click to see full-size image)
Get help about this item from fellow customers.
Ask your questions. Share your answers.
29 Questions | 51 Answers
Customer Service
Live Assistance:
Daily 7am-10pm Central Time
Daily 7am-10pm Central Time
- 1-800-227-7776
- Contact Us
- Reward Points
- Gift Cards
Prices shown are in U.S. funds
All pages © 2006 - 2012 BPS Direct, L.L.C. All rights reserved.