Loading...
Your Cart ()
Close Panel
Uncle Buck's® Pond Prowler Boat - 9'
Redesigned with padded seats and even more floor space, Uncle Buck's 9' Pond Prowler is the perfect boat for quietly reaching those hard-to-reach fishing spots in total comfort. Constructed from rugged, high-impact ABS plastic, the Pond Prowler has internal ''cut-to-fit'' block foam for flotation and a wood-reinforced, ribbed floor for strength. The easy-to-maneuver Pond Prowler's ''deep rib'' hull ensures the boat remains balanced even in rougher water with two anglers constantly shifting their weight. Incredibly easy to transport, the 9' Pond Prowler weighs only 115 lbs. and is 48'' wide which is the same width
[Read More]
Redesigned with padded seats and even more floor space, Uncle Buck's 9' Pond Prowler is the perfect boat for quietly reaching those hard-to-reach fishing spots in total comfort. Constructed from rugged, high-impact ABS plastic, the Pond Prowler has internal ''cut-to-fit'' block foam for flotation and a wood-reinforced, ribbed floor for strength. The easy-to-maneuver Pond Prowler's ''deep rib'' hull ensures the boat remains balanced even in rougher water with two anglers constantly shifting their weight. Incredibly easy to transport, the 9' Pond Prowler weighs only 115 lbs. and is 48'' wide which is the same width of a full-size truck's bed between the wheel-wells. Pond Prowlers are pre-wired for a trolling motor and are outfitted with corrosion-resistant aluminum seat frames, padded folding swivel fishing seats, molded in trays and the rear metal transoms are reinforced with wood.
|
20 Questions | 52 Answers
Outdoor Answers
Get help about this item from fellow customers.
Ask your questions. Share your answers.
Expand All
Collapse AllDetails:
If so what size?
(read all my Q&A)
Answers
A:
So, the item works with a 5HP outboard motor. Therefore, if we convert it takes one horsepower to approximately equal to 15 pounds of thrust. Look for Approx 75 lbs thrust trolling motor. I hope this helps. Thanks!Details:
Does anyone know where I can buy a small boat cart that can transport thisboat from the pickup to the edge of the water. Where I fish does not have a boat ramp, and I have to haul the boat about 75 feet to the water.Answers
A:
You might try the Garelick Boat Dolly model 71050. At this time, we are currently out of stock and unable to backorder item number 38-529-702-00. This •Helps move and roll small fishing boats with ease.Title: Garelick
URL: http://www.garelick.com/productsear...
Thanks!
Details:
Im a big guy and will be in this boat alone. how sturdy is it as far as flipping over?Answers
A:
The 48" beam width should help to make the boat fairly stable and the design of the boat lends it much to the same way a SOT kayak is. However, always be sure to wear a life preserver as accidents may happen at any time in any boat.Answers
Answers
A:
All right,,,just don't get up to fast u may end up wet
A:
Two people can fish comfortably from this boat. There is plenty of room.A:
Yes, plenty of space and very comfortable
Top 500 Contributor
A:
Yes, two people can fish comfortably. I share the second seat with my wife. In the middle of the 9' Pond Prowler, I built a small bench to hold my tackle box and 5 rod holders that store my poles vertically. There's plenty of room for a small cooler, net, extra clothing, utility box, and the oar.
Top 250 Contributor
A:
Yes! It is very good and you can put 2 people it in and it will be comfortable!Answers
A:
both bow and stern
Top 500 Contributor
A:
It has two on the front and two on the back. Be careful how much tension you put on the rope or chain to winch the boat up. The eyelets can separate.
Top 250 Contributor
A:
Yes it has to eye holes in the front to tie it down.Details:
I already own a small pond boat simular to the small pontoon style, but I need to replace it. 15 years old and now leaks because of sun rot. My question is this. I am looking at the uncle buck's version of the 9 ft. pond boat and also at the pontoon version at the same time, since they are both priced at nearly the same, and wonder which of the two boats is faster with the same trolling motor, be it 30lb thrust, or otherwise? I am almost persuaded to buy the uncle bucks version over the other style because it has storage compartments which the pontoon design doesn't have.Answers
A:
The 9' is perfect, a great boat.Details:
What length of shaft should the trolling motor have for the UB Pond Prowler? It looks like it would be the same whether mounted in front or back.Answers
A:
I use a 36" shaft, works great
Top 500 Contributor
A:
I used the Minn Kota 35lb thurst with the normal length shaft.
Top 250 Contributor
A:
A 30 inch or the 45 would workwonderfly.
Details:
Any idea if this boat will it between the wheelwells of a toyota tacoma? I have 41.5 inches between the wells. ThanksAnswers
A:
You will need to measure the width of your truck. The beam width for this item is 48".A:
yes
Top 500 Contributor
A:
It's a little wide for 41.5". I think the width is 45 or 46 inches
Top 250 Contributor
A:
More than likley it is about 3 1/2 to 4 feet wideAnswers
A:
Install plug in one end and drain water to the end u install the plug in and drain,,,don't know why the company that makes these boats don't install something!!!!!!A:
Lift the boat straght up so the back of the boat is on the ground and water will drain from the back metel transom plate.
Top 500 Contributor
A:
That's a proble. You will need to keep a 2 liter bottle handy. I've not had an issue with getting water in or out of this boat.
Top 250 Contributor
A:
I know there is a plug on the top but i do not know about in between i would take it to bass pro and have them look at yt
Get help about this item from fellow customers.
Ask your questions. Share your answers.
20 Questions | 52 Answers
Customer Service
Live Assistance:
Daily 7am-10pm Central Time
Daily 7am-10pm Central Time
- 1-800-227-7776
- Contact Us
- Reward Points
- Gift Cards
Prices shown are in U.S. funds
All pages © 2006 - 2012 BPS Direct, L.L.C. All rights reserved.